วันพุธที่ 13 พฤศจิกายน พ.ศ. 2556

Defining The Niche: The Liberty Walk GT-R

Defining The Niche: The Liberty Walk GT-R

 

thank from like 

http://www.speedhunters.com/2013/11/defining-the-niche-the-liberty-walk-gt-r/

Defining The Niche: The Liberty Walk GT-R




Is Liberty Walk taking over the internet? Has the Nagoya-based company declared war on the SEMA Show? It sure seems like it if the number of cars we’ve seen wearing the company’s signature wide body conversions is anything to go by. If Kato-san was attempting to get our attention, it’s safe to say he definitely has! After taking a closer look at his Ferrari 458 last week, it’s now time to move onto his second SEMA project…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-2
… the LB☆WORKS Nissan GT-R.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-3
If you cast your minds back a few months, you might recall that Kato-san allowed Speedhunters to unveil the first rendering of the GT-R
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-4
… a CG image that Miura-san at TRA Kyoto – the man that Kato-san has entrusted to design and produce his aero kits – later showed in a variety of body colors and angles. So like the 458, we all had a pretty good idea of what the car would look like in its finished form. However, as was the case with the Ferrari, seeing 3D images on the internet can never prepare you for the full impact of witnessing the completed car.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-5
If there’s one car out there that probably doesn’t need its fenders blistered it’s the R35 GT-R. The big Nissan – successor to the Skyline GT-R – boasts a pretty robust stance to start off with: big Aeroblade (in Nissan talk) front fenders joining a chunky, bulbous rear end that makes it one of the most imposing cars on the streets today. But who the hell said aggression has limits?
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-25
Kato-san certainly didn’t, so when he asked TRA Kyoto to make those works-style overfenders as “in your face” as possible…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-19
… Miura listened, and delivered. The bolted-on look is once again used, exposed screws…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-10
… showing each mounting point onto the cut stock fender below it. The FRP addition follows the primary crease line of the GT-R’s wheel arch…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-20
… extending downwards along the side air outlet, then all the way down to the main skirt line.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-12
Making the LB☆WORKS aero stand out as much as possible, while sticking to the company’s recognizable design ethos, was all part of the plan.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-11
PRESENTATION MODE
DOWNLOAD WALLPAPER
SHARE
Color is always important – especially for a show car – and the OEM dark metal grey makes every line of the GT-R’s exterior pop under the sun’s rays.

The GT-R has been captivating the minds of the worldwide tuning industry since it was first revealed back in 2007, and it’s quite cool to see that Liberty Walk decided to do something with a domestic car instead of the usual imports and exotics it tends to concentrate on.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-7
Will this car appeal to everyone? Of course it won’t – it’s not meant to. Like all the cars that bear the LB☆WORKS name, it’s aimed at a very unique individual – one that just isn’t content sitting at the wheel of a car that everyone can own.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-8
So it seems that this sort of aero package is born out of exclusivity; the need to satisfy a very small niche…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-16
… and judging by its rump – the sheer need to shock! Miura may as well have come up with the biggest works-style overfenders ever created for a car – the massive rear pieces extending from underneath where the door ends and arching all the way around and touching the high hip line. Over the top touches like this were sort of a necessity, you don’t try to make a statement with a car like the GT-R and not go full out.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-9
Take how the overfenders end abruptly once they pass the bumper line…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-27
… and tuck in, quickly merging into the original dimensions of the car. Miura here gave a nod to aerodynamics, the recess behind any fender helping the extraction of air from the wheelarch and some of the flow form the underside of the car, which if you recall is completely flat on the R35 to smooth air passing underneath it. While this detail may or may not add a functional aero effect, the fact that you end up seeing more of the rear tires is a big bonus in the looks department, that aggressive offset of the rear wheels making quite the statement.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-14
Does it all seem a little exaggerated? Yes, but that was the obvious intention, having been given carte blanche there was little if no conformity to what he was sculpting away at.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-17
Take the rear wing for example; Miura keeps up with the times, he gets his inspiration from a variety of styles, is always paying attention to how things change in the vastness of the car world and it was motorsports that provided the idea for the spoiler. As we have seen, with the introduction of DTM regulations in Super GT most GT500 teams are adopting the swan neck wing stays which literally hangs the wing from the top side over the car. Here it’s purely a style driven addition of course, but one that brings a touch of race spirit to the road. I’m sure we will be seeing more of these type of wing stays in the aftermarket during the course of 2014.

Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-18


Race car touches don’t end there of course, the Liberty Walk GT-R sports a GT-3 inspired extended front lip spoiler to help slice through the air and actively boost downforce while at the rear Miura has extended the centre section of the diffuser and bolted additional winglets onto each corner, for an additional visual impact.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-15
The LB☆WORKS treatment has created a one-of-a-kind GT-R that’s just as aggressive as the BenSopra R35, but in a totally different way.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-21
No show car is ever complete with out a well chosen set of rims, and serving as a dark contrast to the silver-bronze body, Liberty Walk went for a set of Forgiato Maglia wheels…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-22
… custom painted in satin black and measuring 20×11-inch up front and 20×12-inch at the rear. The LB☆WORKS GT-R runs Toyo Proxes tires, 285/35ZR20 at the front and rather large 315/30ZR20s on the rears, boosting grip levels considerably.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-23
Providing the unmissable stance element and dropping the car right to the ground is the CSD Platinum VIP adjustable suspension…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-36
… featuring air cups at each corner that allow the R35 to go from normal-ish low ride height…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-24
… all the way down to show car mode at the push of a button. See what I mean with the tucked in rear over fenders? Can you see how much of the rear tires you can actually see? Yes we like!
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-26
PRESENTATION MODE
DOWNLOAD WALLPAPER
SHARE
The Japanese phrase Jiyū ni aruku underneath the Liberty Walk logo on the rear bumper roughly translates as ‘walk freely’, and it’s somewhat of a motto for Kato-san. It’s an emphasis on the way in which he approaches his cars and his products, and to some extent, his life – doing his own thing and striving to reach his goals in his own unique way.

Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-18


Race car touches don’t end there of course, the Liberty Walk GT-R sports a GT-3 inspired extended front lip spoiler to help slice through the air and actively boost downforce while at the rear Miura has extended the centre section of the diffuser and bolted additional winglets onto each corner, for an additional visual impact.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-15
The LB☆WORKS treatment has created a one-of-a-kind GT-R that’s just as aggressive as the BenSopra R35, but in a totally different way.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-21
No show car is ever complete with out a well chosen set of rims, and serving as a dark contrast to the silver-bronze body, Liberty Walk went for a set of Forgiato Maglia wheels…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-22
… custom painted in satin black and measuring 20×11-inch up front and 20×12-inch at the rear. The LB☆WORKS GT-R runs Toyo Proxes tires, 285/35ZR20 at the front and rather large 315/30ZR20s on the rears, boosting grip levels considerably.
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-23
Providing the unmissable stance element and dropping the car right to the ground is the CSD Platinum VIP adjustable suspension…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-36
… featuring air cups at each corner that allow the R35 to go from normal-ish low ride height…
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-24
… all the way down to show car mode at the push of a button. See what I mean with the tucked in rear over fenders? Can you see how much of the rear tires you can actually see? Yes we like!
Larry_Chen_Speedhunters_Liberty_Walk_Nissan_GTR_R35-26
PRESENTATION MODE
DOWNLOAD WALLPAPER
SHARE
The Japanese phrase Jiyū ni aruku underneath the Liberty Walk logo on the rear bumper roughly translates as ‘walk freely’, and it’s somewhat of a motto for Kato-san. It’s an emphasis on the way in which he approaches his cars and his products, and to some extent, his life – doing his own thing and striving to reach his goals in his own unique way.



 

วันพฤหัสบดีที่ 12 กันยายน พ.ศ. 2556

KYUSHA DREAMS: ROCKY AUTO’S CARBON HAKOSUKA

KYUSHA DREAMS: ROCKY AUTO’S CARBON HAKOSUKA

copy from http://www.speedhunters.com/2013/08/kyusha-dreams-rocky-autos-carbon-hakosuka/

 


Purists, look away. I’m pretty sure that by now you should all know what the name Rocky Auto is synonymous with. This is one place that isn’t afraid to fettle with authenticity, taking a modern approach to the sort of Japanese vintage rides we all know and respect. Watanabe’s latest project couldn’t possibly be a better ambassador for this way of thought and it’s one we got a little glimpse of back in February at the Nostalgic 2 Days. Back then the car wasn’t even fitted with an engine yet, but it didn’t take much imagination to figure out that with a carbon fiber body…

… it would be running something pretty special for propulsion. The car isn’t actually completed yet, but Watanabe-san was kind enough to quickly fit the wheels and a bunch of other interior parts the night before my visit and get it down from the lift so that I could feature it. And I’m glad he did because this is one car I’ve really been looking forward to admiring in all its glory. It follows much the same recipe as the RB30-powered carbon S30 Rocky Auto built back in 2009, except what makes it very special is that you just don’t see these wild sort of conversions done to Hakosukas. Seeing that the car was only ever sold in Japan, it tends to be a more revered Nissan classic – one that people haven’t dared to meddle with too much. Most are usually more than content with going for a 2000 GT-R look and modding the L-series motor that usually powers them, except of course Watanabe had different ideas.

The exterior itself is mostly wrapped in carbon-look vinyl but countless bits and pieces have been custom made out of carbon fiber. So the whole bumper-less front fascia is carbon, as are the headlight covers, the hood and the fender flares. It all combines to give the car a sort of Works look but with the obvious modern feel carbon fiber introduces to the equation.

There are a lot of cool details that further spice up the looks like these prohibitively expensive dry-carbon fender mirrors from 09 Racing…

… or the C-pillar air outlets, again made in carbon.

Thanks to adjustable Rocky Auto coilovers the car has been significantly lowered onto a set of 15″ Work Meister CR01s, measuring 9.5 inches across at the front. The lack of appropriately sized tires needed to achieve the look that Watanabe wanted, led him to stumble upon a set of old 225/50VR15 Pirelli P7 Cinturato. As you can see from the picture above the aged rubber hasn’t particularly liked the excessive stretching its been subjected to and has begun to split along the rim.

The 11-inch wide rears are fitted with Pirelli P700s…

… in slightly wider 255/50VR15 size. The custom offset of the wheels has been perfectly selected for an optimal fit. The last thing remaining to be done is lower the rear suspension…

… pretty much as far as it will go. With such a unique exterior treatment for a KGC10, it’s hard not to get curious about the car’s driveline…

… which of course hasn’t got a single period correct component in sight. Recall our little tour of Watanabe’s new garage where we came across about seven R32 Autech Versions? Well this is why he has so many – they are donor cars for this rather rare and special version of Nissan’s RB26.

The limited edition Autech R32 was never regarded as quite the special car as other limited edition versions of the Skyline, but the engine that powered it was quite interesting. After grabbing RB26 shortblocks from the Nissan production line Autech would disassemble the engines, and get to work on them. They bored out the blocks to accommodate the 1mm oversized 87mm pistons that increase capacity to 2,627 cc and balanced the crank, con rods and flywheel to guarantee smooth, vibration-free operation all the way to the redline. Furthermore the head was polished for extra flow, helping to extract 220hp.

The engines are easily recognizable thanks the S/S plaque on the intake plenum, playing homage to Shinchiro Sakurai, Prince’s engineer responsible for developing the very first Skyline and later the Prince R380 race car.

To liberate a few more horsepower, Rocky Auto added Tomei Powered camshafts with slightly more aggressive duration and lift, and fine-tuned the overlap thanks to HKS adjustable cam gears. A full stainless steel exhaust system, including the six-into-one headers, helps give the RB26 a more vintage raspy tone and slightly increases throttle response. The engine is fitted with a lightweight Toda Racing flywheel and sends drive to a Nissan five-speed transmission.

Watanabe is still tuning the suspension and will probably end up running slightly more negative camber than what the top mounts of the coilovers allow.

To pay homage to the successful 2000 GT-R race cars that dominated endurance races in Fuji Speedway in the early to mid seventies, an external front-mounted oil cooler was fitted – quite a contrasting addition against all the black shiny carbon fiber.

An aluminum Flex radiator of generous dimensions makes sure the RB26DE never runs into issues even if its future owner decides to run the car hard on track.

It might be a sore sight to digest for those that appreciate only period-correct alterations, but it’s not like Watanabe cares. While he would never dream of messing around with a real S20-powered GT-R, these relatively affordable base model Skylines offer a fun platform upon which to go wild on and often create rather fast and exciting cars to drive.

Just like at the front, the rear end is pretty wild, with carbon fiber replacing the whole section, topped off with a carbon trunk and spoiler.

The interior is the final area of the car that needs to be finished off and the day before my visit they had to interrupt fitting the A/C system to get the car ready for the shoot, which is why there are a bunch of wires and looms hanging down under the dashboard.

And talking of the dashboard you may have noticed that it’s a one off piece, made out of aluminum…

… and wrapped in carbon-look vinyl to match the theme of the car. The Carbon-look AutoMeter tachometer and speedometer…

… join the four centrally mounted auxiliary gauges, all neatly positioned for clear consultation.

There’s no hiding the fact that this car will raise a lot of questions to different enthusiasts, but it’s hard not to commend the innovative way of thinking in which Rocky Auto always approaches vintage Japanese rides. If the end result is to extract more fun and enjoyment out of a car that was previously somewhat slow and uninspiring to drive, surely there’s nothing wrong with that?

Dino Dalle Carbonare
Instagram: speedhunters_dino


Rocky Auto Carbon KGC10 Skyline
Numbers
Max power – 220hp, max torque – 245Nm
Engine
Autech S/S Plasma-RB26DE engine swap, Autech forged 87 mm pistons (2,627 cc), 11.5:1 compression ratio, Autech balanced connecting rods and crank, Tomei Powered 260-degree camshafts (IN & EX), HKS cam pulleys, Autech ported head, Trust air filter, Rocky Auto exhaust manifold, Rocky Auto exhaust system, externally mounted oil cooler
Driveline
Toda Racing lightweight flywheel, R32 five-speed transmission
Suspension
Rocky Auto height-adjustable coilovers
Wheels/Tires
Work Meister CR01, 9.5Jx15 (front), 11Jx18″ (rear), Pirelli P7 Cinturato 225/50VR15 (front), Pirelli P7000 255/45VR15 (rear)
Exterior
Rocky Auto carbon front bumper/structure, Rocky Auto carbon bucktooth lip spoiler, Rocky Auto carbon headlight covers, Rocky Auto carbon hood, 09 Racing dry carbon fender mirrors, Rocky Auto front and rear carbon fender flares, Rocky Auto carbon rear bumper/structure, Rocky Auto carbon trunk lid, Rocky Auto carbon rear spoiler, carbon vinyl wrap
Interior
Spot welded and reinforced chassis, Recaro seats, custom dashboard, AutoMeter gauges, Datsun Z steering wheel, automatic A/C

Other Rocky Auto features on Speedhunters
Other Hakosuka stories on Speedhunters

Rocky Auto