from http://www.speedhunters.com/2012/05/where-drift-cars-are-born/
to me about a special RTR related project for the new 2013 mustang.
Based on the prep that has gone into this chasis I bet
Vaughn has cooked up something really good.
There were shelves lining the walls that contained parts for the
racecars. Everything from front grills to exhaust pieces.
I don’t know what a water laser is, but it sounded cool.
I wonder what lucky car gets to have these nice-looking bash-bars?
Just across the driveway is ASD’s personal bodyshop and paint booth.
This is where they paint all the racecars, as well as customers’
vehicles.
There were remnants of past Mustangs littered around the shop.
With a big shop like ASD you would think they are not concerned with
being wasteful, but in fact they try hard not to be. When parts can be
repaired ASD make sure they restore them to as-new condition again.
It’s the same with bumpers and body parts. If they have little damage
they will refinish them and put them back into use.
ASD brings that extra level of professionalism to the sport of
drifting which should be adopted by every one of the teams. It is very
rare to see any of their cars running without a front or rear bumper. In
fact I only remember seeing an ASD car on the starting line without a
bumper just once, when Vaughn Gittin Jr was going against Fredric Aasbo
back in 2010.
There was just one more room left that my camera was allowed to see.
Ian Stewart is the crew chief for the entire team; he is also the owner
of ASD.
This was Tyler McQuarrie’s old convertible 350z. The Nissan has been
rebuilt from the ground up and it is 100% owned by ASD.
From the looks of it I think we will be seeing this back in
competition form in one way or another.
Next to the 350z was a brand-new body-in-white Ford Mustang.
According to Ian, all Mustangs come from the factory in brown, so all
of their body-in-white cars are just resprayed after all the chassis
prep work is done.
There one was in the process of becoming a race car. These chassis
have over 1,000-1,200 hours of work put into them, depending on
customer requirements, which includes the installation of a Formula
Drift-spec roll-cage. I let the guys get back to their hard work, and
left ASD with the promise that I’d return the week before Formula Drift
Atlanta.
I thought it would be fun to hang out with the guys again and follow
them on their relatively short trip from their shop in Charlotte, NC, to
Road Atlanta in Braselton, GA. I arrived in the morning to find Dean
Steele washing Chopper the friendly dog.
Even though Chopper struggled during his bath, he was happy in the
end.
Everytime Formula Drift goes to Atlanta the boys at ASD rent a van to
drive down to the venue. They also use it as a support vehicle. Dave
Gibson, the general manager at the shop, is seen here branding the van
properly.
Eric Ross, also known as Ewok, was assembling hydraulic E-brake
systems right up until it was time to leave. You don’t want your loyal
customers to go through E-brake withdrawals.
We went to fuel-up and get the necessary snacks to last us for the
205-mile trip across three states. Rick Lamber, car chief for Justin
Pawlak, was at the helm.
Before we left, I decided to add a few more free ponies to my rental
car. I needed it to keep up with those ASD guys. They drive with the
pedal to the metal.
Before we knew it we were in South Carolina. I am not very used to
passing through states so quickly after growing up in California. It
took me 12 hours to drive to Oregon from Los Angeles.
Once we entered South Carolina it started to rain cats and dogs.
So we decided to grab some local delicacies.
Dean, Rick and Ewok are originally from Southern California like me,
so they have a tradition of stopping for tacos.
But it was just my luck that the taco joint we were going to was
permanently closed, so we had to take another option.
After sampling the local cuisine we decided to finish the last
100-mile stretch into Gerorgia. Here was Rick waving goodbye as he hit
the nitrous button.
At last we made it to one of the best road courses in the world.
I’ve never seen it soaked like this, so I just paused for a moment to
enjoy the beautiful sight.
The Falken rig was already waiting at the track ready to be unloaded,
as the 350z still needed its technical inspection.
I checked inside to confirm that it was just as clean and organized
as the ASD shop.
Considering the limited space I think they fared pretty well.
Tomorrow is practice day and the day after is the start of Round 2 of
the Formula Drift Pro Championship series at Road Atlanta. Stay tuned
for more updates on this long-awaited event.
Larry Chen
มาแล้ว!!!รับปากนูไว้ว่จะเอารูปการผ่าล้อมาให้ดูครับ
